Welcome to MicroTech EFI, Home of the World’s Quickest & Fastest Imports!!
New Releases
Facebook Posts
20B centre stationary gear bearing install 🔧
The longer eccentric shaft, more plates & housings that can move around, more bearings, the same size oil pump as a #13B and the 2 piece shaft with the taper means that there’s a lot more 💩 that can go wrong on a #20B engine 😬
Here’s the best way I’ve found to install the stat gear bearings, along with a few little tricks I do to give those bearings the best chance possible of surviving in a big HP engine 🤞🏼
31 CommentsComment on Facebook
90% of the broken oem 20b shafts have been down to inproper centre bearing installation. Keep em coming jono 👏
Another awesome video dude. Thanks for sharing 💪🏻🤙🏻
Beautiful work Jon Blanch Racing. Thanks for sharing your work.
Brilliant work jon 👌 It’s one percenters that make your builds second to none 👏👏👏
Great stuff
Do you sell the tool?
Awesome video dude
I wonder if you made the oil clearance bigger with the sandpaper…..
😂 shit I thought you were about to say shinier than my balls 😂
I love watching these rotary builds
Very nice , exact workmanship. I HOPE YOU NEVER GET THAT Cloth caught in the gear or the lathe will rip your hand or arm off like it has done to many people. Very dangerous at that speed
Awesome video. 💪🔥💯
Good video..👍
Congratulacion mazda speed nhra billet boss team atari efi 1 injection to pr .✍️💯🫡💪🏁🏎🇵🇷🏝🥳😋🐇🐻🙆♀️🏌🪂👌☀️🥖☕️🤑🙏🙌
Great video mate,Precise
You can open a school on this shit mate👌
Looks like a nice bit of work
Thanks for the demo
Isnt there a overlay on that bearing?
Téè Bahg Bonâh
Dani Rms
💪🏼💪🏼💪🏼
❤️❤️❤️
💪🏾🔥
💪💪
Today’s Rotary Engine Tech Video 🎥🤓
How to install an insert into a Billet Boss plate.
No doubt anyone who’s used billet plates before will know how to do this, but hopefully the guys who haven’t will learn something new from this video 🙏🏼
Any questions 🙋🏼♂️ put them in the comments section below & I’ll do my best to answer them.
#12a #13b #20b #26b #rotary #rotaryengine
52 CommentsComment on Facebook
Awesome - love watching your video s , very interesting
Love your work JB. Keep those videos coming
Awesome and informative as usual 👌
Great video, always learning. Thanks.
I want to buy a set for 13b
Is the combustion portion of the rotor ceramic coated?
Very nice! One day I'll own a nice piece like that😎😎😎
Awesome work Jon Blanch Racing. Your work is amazing.
Great work Jon. Appreciate you sharing these videos
I don't care how many new different things u can do on rotary engines.... just do one thing that they can run 5.99 sec in 1/4 mile😂🤣😂🤣
Good stuff, very helpful..👍
Too much work I just go with an ls motor
Awesome stuff Jon Blanch Racing
Where can I get this order
Can these run roller bearings
That's bloody sexy!
Can believe the heavy-duty girls aren't winging with the torque tool comment 😆😆😏🍿
Que belleza
Eduardo Cerbone Escapamentos
The old fat wench 🤣🤣🤣
Sweet stuff!
Mean , mechanical candy
Thankyou for sharing,Great video
Jerry Eckert have you seen this?
Another Billet Boss 20B laid out on the bench ready to be assembled.
I’ll make some more vids 🎥 as it goes together over the next few days 🔧
#Rotary #12A #13b #20b #rotaryengine
42 CommentsComment on Facebook
26bs and 13bs are dope but there is just something about a bridge ported 20B. There is nothing like it.
I'd love to visit your shop 🙌
Love your work
Awwwww that is beautiful!!!!
Cuantos dolares sale y donde se consigue el kit. Gracias .
Víctor Fonseca mandemos a traer uno
🔥🔥💪🏻💪🏻👍
Billeted Rotary's Rock, we've developed a new ignition timing strategy for the Rotary Engines on leading and Trailing with MultiSpark on both, would like you to take a look😉
Dude I'm sending my 20b down to you Jon Blanch Racing needs a Bridgeport and bearing supports 😁
Can't wait to hear it running.
Love these style of Videos Jon Blanch Racing
Awesome mate 🤩
💪🏾🔥
Very good
Mind blowing Keep up the awesome work work 👍❤️
What e shaft?
Street car
What apex seals would you recommend for a NA 20b pp ?
👏👏👏👑
Speechless ❤️
Good job
Mate it's gonna be a cracker,so many awesome rotaries getting produced in Australia these days,YEAH THE BOYS 💪
Not using the deep oil groove rotor bearings for such a big build?
Kery Performance
Billet Boss Front cover video part ✌🏼
After my last video I received a ton of different questions about these billet front covers.
This follow up video 🎥 will hopefully answer the most common ones I was asked.
If I’ve missed anything 🤔 put your question in the comments & I’ll do my best to answer it
20 CommentsComment on Facebook
That's an awesome explainer Jon Blanch Racing
Excellent video explaining.. thankyou for sharing all your videos
Nicholas Warrick
💪🏾🔥
💪🔥🔥
Great video 👍
Will it fit my Honda 😂 Love ya updates mista 🤙
Tell us a price John Jon Blanch Racing
Well explained as usual m8.
Wicked mate.
That cover is like jewellery
Jon what is the benefit of using this front cover?
And don’t forget to remark your tdc
How to get the timing with that front hub
Arthur Joubert alternate option
Package Deals
