Welcome to MicroTech EFI, Home of the World’s Quickest & Fastest Imports!!
New Releases
Facebook Posts
Todayβs Rotary Engine Tech Video π₯π€
How to install an insert into a Billet Boss plate.
No doubt anyone whoβs used billet plates before will know how to do this, but hopefully the guys who havenβt will learn something new from this video ππΌ
Any questions ππΌββοΈ put them in the comments section below & Iβll do my best to answer them.
#12a #13b #20b #26b #rotary #rotaryengine
... See MoreSee Less
- Likes: 0
- Shares: 156
- Comments: 49
49 CommentsComment on Facebook
Awesome - love watching your video s , very interesting
Love your work JB. Keep those videos coming
Awesome and informative as usual π
Great video, always learning. Thanks.
I want to buy a set for 13b
Is the combustion portion of the rotor ceramic coated?
Very nice! One day I'll own a nice piece like thatπππ
Awesome work Jon Blanch Racing. Your work is amazing.
Great work Jon. Appreciate you sharing these videos
I don't care how many new different things u can do on rotary engines.... just do one thing that they can run 5.99 sec in 1/4 mileππ€£ππ€£
Good stuff, very helpful..π
Too much work I just go with an ls motor
Awesome stuff Jon Blanch Racing
Where can I get this order
Can these run roller bearings
That's bloody sexy!
Can believe the heavy-duty girls aren't winging with the torque tool comment ππππΏ
Que belleza
The old fat wench π€£π€£π€£
Sweet stuff!
Mean , mechanical candy
Jerry Eckert have you seen this?
Im not a fan of the rotary engine but the engineering I see with the billet housing and insert in this video is about as good as it gets for the rotary engine. π
It's not a motor unless it's a Rotor
Another Billet Boss 20B laid out on the bench ready to be assembled.
Iβll make some more vids π₯ as it goes together over the next few days π§
#Rotary #12A #13b #20b #rotaryengine
... See MoreSee Less
41 CommentsComment on Facebook
I'd love to visit your shop π
Love your work
Awwwww that is beautiful!!!!
Cuantos dolares sale y donde se consigue el kit. Gracias .
π₯π₯πͺπ»πͺπ»π
Billeted Rotary's Rock, we've developed a new ignition timing strategy for the Rotary Engines on leading and Trailing with MultiSpark on both, would like you to take a lookπ
Dude I'm sending my 20b down to you Jon Blanch Racing needs a Bridgeport and bearing supports π
Can't wait to hear it running.
Love these style of Videos Jon Blanch Racing
Awesome mate π€©
πͺπΎπ₯
Very good
Mind blowing Keep up the awesome work work πβ€οΈ
What e shaft?
Street car
What apex seals would you recommend for a NA 20b pp ?
ππππ
Speechless β€οΈ
Good job
Mate it's gonna be a cracker,so many awesome rotaries getting produced in Australia these days,YEAH THE BOYS πͺ
Not using the deep oil groove rotor bearings for such a big build?
Kery Performance
Mathew Gasparrini
Looks awesome,keep up the great work.
Billet Boss Front cover video part βπΌ
After my last video I received a ton of different questions about these billet front covers.
This follow up video π₯ will hopefully answer the most common ones I was asked.
If Iβve missed anything π€ put your question in the comments & Iβll do my best to answer it
... See MoreSee Less
20 CommentsComment on Facebook
That's an awesome explainer Jon Blanch Racing
Excellent video explaining.. thankyou for sharing all your videos
Nicholas Warrick
πͺπΎπ₯
πͺπ₯π₯
Great video π
Will it fit my Honda π Love ya updates mista π€
Tell us a price John Jon Blanch Racing
Well explained as usual m8.
Wicked mate.
That cover is like jewellery
Jon what is the benefit of using this front cover?
And don’t forget to remark your tdc
How to get the timing with that front hub
Arthur Joubert alternate option
These Billet Boss front covers with the bearing support have played a big part in helping push rotary horsepower levels & engine reliability a little further over the last few years.
For those guys who havenβt seen one before, check out the video to see how they work.
#12A #13B #20B #26B #rotary #rotaryengine
... See MoreSee Less
35 CommentsComment on Facebook
I'm a newy boy threw and threw m8 love the work you are doing and the way you put Newcastle on the map with your work.
Jon, a question... is e-shaft end play setting a thing with this set-up? If so, how does one go about setting-up the end play? TIA.
Very nice
Thank you for all the great videos.
Absolutely amazing mate. Can’t wait to build a billet motor ππ» Just need to win the lotto π
πͺπΎπ₯
Very nice
How much are these?
Very interested in one of these. What is the process to fit one? Can it just be bolted on and away you go?
πͺπ₯π₯
What is the price on a cover for 20b?
Chucky Fbs q
Solid vidβ
Do you need a specific eccentric shaft for this front cover or does it help with all eccentric shafts?
Derek Crameri
What is the price on a cover for 13b?
How much
Works of art π
Piet Landi le Roux
Awesome !
Steve McDonald
?$
Julianthony Rivera
Package Deals