Software

MICROTECH LAPTOP SOFTWARE

LTC

MicroTech LTC Tuning software version 3.1 is now available for download.

This new version software must be used if you are tuning one of our current version LTC series ECU’s. The 3.1 version software will allow access to new the features included in our latest version ECU’s like fine injector resolution, engine protection mode, flex fuel tuning, save maps to disc etc etc.

Please Note: These features will only work on “C” series ECU’s with the current version firmware installed on the unit.

The LTC 3.1 software is compatible with all previous version MicroTech Laptop tune-able ECU’s so we recommend un-installing your previous version software and upgrading to this new version. The software will automatically recognise whichever model ECU it is connected to and will display the mapping points & features relevant for that particular model.

MICROTECH LAPTOP SOFTWARE v3.1


MICROTECH USB DRIVER

DONGLE-500x500

The USB driver must be downloaded to enable the USB Laptop Adapter to work.

       MICROTECH USB DRIVER       


MICROTECH LTC DASH MANAGER SOFTWARE

DashManager

Please check your dash version before downloading either dash software (dash version is displayed on initial power up). NOTE: The MicroTech Laptop Software v3.1 must be downloaded before dash software (see above).

 

LTC Dash Manager Software is to be used on MicroTech LTC Dash units up to Ver 2.9.

       LTC DASH MANAGER SOFTWARE      

LTC Handset Editor Software is to be used on MicroTech LTC Dash units Ver 3.0 onwards.

       LTC HANDSET EDITOR SOFTWARE      

       LT-32C 90PSI SOFTWARE